Publicité
Please note that even in OFF mode, the camera still consumes power at a very low
level. Therefore, please remove the batteries if the camera will not be used for a long
time period.
The OFF mode is the "safe mode" for actions such as: replacing the memory card or
batteries, or transporting the camera.
9.3.
Customizing the operating settings
To enter the camera settings MENU, slide the switch to the SETUP position (the LCD
screen will light up), then press the MENU button.
You can navigate the setting interface by pressing , , or . Press OK for
selection, press MENU to exit to the previous page.
The settings presented below can be made directly on the LCD screen of the device
but also in the free mobile application available on Android and iOS.
GENERAL MENU (displayed by default)
Mode
PIR interval
Time Lapse setting
Settings
Mode
PIR interval
00:20
OFF
Programmable options
(default settings in bold characters)
Photo | Video | Photo + Video | Time Lapse
− Photo: the camera will only shoot photos.
− Video: the camera will only shoot videos.
− Photo + Video: upon the same trigger event, the
camera will shoot photo(s) first then a video.
− Time Lapse: automatic photo capture at a pre-set time
interval (see "Time Lapse setting" parameter to set the
time interval).
Default PIR interval: 20 seconds
Programmable from 5 seconds to 59 minutes 59 seconds
This setting is disabled if the selected Mode is "Time
Lapse".
Guide PIE1061 – Mars 2024 – ind. C - 28/114
PIR sensitivity
IR LED brightness
Timer
OFF
Publicité
