Publicité
App name: Camera Trap Wireless
The mobile application will allow you to:
‒ carry out all the settings of the device
‒ view the photos sent by the camera
In Google Play (Android) or in the App Store (iOS), search for the Camera Trap
Wireless app and install it on your smartphone.
Open the application and create a user account by following the instructions
displayed on the screen.
8.
Adding the camera to the app
‒ Slide the camera switch to the SETUP position then press the MENU button.
‒ Press the button to go to the
‒ Use the button to scroll down to the QR Code parameter then press OK. A
QR code appears on the screen.
‒ Open the Camera Trap Wireless application on your smartphone and log in to
your user account.
‒ On the home page, press the icon at the top right of the screen. A QR code
reader will appear on your smartphone.
‒ Scan the QR code on the camera screen to configure it with the app.
9.
Operation
9.1.
Turn ON the camera
Put the switch in the ON position; the camera is ready to work.
The red start-up indicator light located on the front cover will blink and the LCD
display will count down 5 seconds. This interval allows you time to close the camera
front cover and leave the monitored area.
Once in the ON mode, the camera will take photos and/or videos according to its
current parameter settings.
NOTE: the camera comes pre-programmed with factory default settings.
9.2.
Turn OFF the camera
Slide the switch to the OFF position to turn off the camera.
Guide PIE1061 – Mars 2024 – ind. C - 27/114
menu (NETWORK menu).
Publicité
