Publicité
Time Lapse setting
PIR sensitivity
IR LED brightness
Press OK to set the desired time interval between
photos/videos upon motion detection by the PIR sensor.
Example: if the PIR interval is set to "01 min 00 sec", the
camera will wait 1 minute between photo/video
recordings with motion.
This parameter is enabled only if the selected Mode is
"Time Lapse".
Press OK to set the interval between automatic photo
captures.
H : M : S
00
00
30
Time Lapse programmable from 00:00:05 up to 23:59:59.
Example: if Time Lapse is set to 00:30:00, the camera will
automatically capture photos every 30 minutes.
The "Time Lapse" feature can work together with the
"Timer" feature.
High | Medium | Low
With the PIR sensitivity set to High, the PIR sensor:
‒
is more sensitive to movements by smaller
subjects;
‒
offers longer detection distance;
‒
can more easily detect a difference between body
heat and outdoor temperature;
‒
can more easily trigger the camera.
In high temperature environment, subjects body heat
and environment temperature are hard to tell by the
camera, the suggested setting is high.
However, it is recommended to use low PIR sensitivity in
environments with lots of interference like hot wind,
smoke, near window, etc. This will prevent untimely
triggering.
Auto | High | Low
This parameter allows you to adjust the brightness of the
infrared flash.
Guide PIE1061 – Mars 2024 – ind. C - 29/114
Publicité
