Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Mounting
Against the wall
• Remove the filters from the extractor hood.
A
A
• Hold the hood against the wall.
• Working through the hood, draw the mounting holes (A).
• Drill the holes.
• Push the wall plugs supplied into the holes.
• Insert the screws into the 2 mounting holes (A).
NB: screw the screws in until 1 cm is left protruding from the wall.
• Hang the hood on the 2 mounting screws.
• Tighten the mounting screws.
• Connect the flue pipe to the flue ring.
EN 13
Publicité
Chapitres
Table des Matières
