Publicité
DOOR KIT
KIT PN 2878216
8. Remove the seat. Remove the two existing machine
screws located on the left side. Fasten the "L"
bracket (#31) with one of the screws removed.
9. Position the left lower rear frame (#3) and fasten
onto the "L" bracket (#31) using a
Torx socket machine screw (#17), a
flat washer (#27), and a
washer (#28).
10. Fasten the ends of the left lower rear frame (#3)
using the original hardware removed in steps 5 and
8.
11. Repeat steps 8 to 10 for the opposite side. Reinstall
the seat.
7515127-521E
A-7515127 Rév. C
Front of
the Vehicle
LEFT SIDE VIEW
M6-1.0 X 15mm
20mm O.D. X M6
bonded seal
20mm O.D. X M6
LEFT SIDE VIEW
12. Assemble the left lower front frame (#4) and the left
middle front frame (#5) using a
socket machine screw (#17), a
washer (#27), and a
washer (#28).
13. Install the lower seal trim (#35). Cut excess of seal
trim.
14. Remove the two existing machine screws located on
the left side as illustrated.
15. Slide the upper part of the left middle front frame
(#5) between the windshield kit and the vehicle.
- 5 -
Torx
M6-1.0 X 15mm
flat
20mm O.D. X M6
bonded seal
20mm O.D. X M6
LEFT SIDE VIEW
Imprimé en Chine / Printed in China
Publicité
