Husqvarna 55 Rancher Manuel D'utilisation page 20

Before use:
,
1 Check that the chain brake works correctly and is not
damaged.
2 Check that the rear right hand guard is not damaged.
3 Check that the throttle lock works correctly and is not
damaged.
4 CCheck that the stop switch works correctly and is not
damaged.
5 Check that all handles are free from oil.
6 Check that the anti vibration system works and is not
damaged.
7 Check that the muffler is securely attached and not
damaged.
8 Check that all parts of the chain saw are tightened
correctly and that they are not damaged or missing.
9 Check that the chain catcher is in place and not damaged.
10 Check the chain tension.
General working instructions
IMPORTANT!
This section describes basic safety rules for using a chain
saw. This information is never a substitute for professional
skills and experience. If you get into a situation where you
feel unsafe, stop and seek expert advice. Contact your
chain saw dealer, service agent or an experienced chain
saw user. Do not attempt any task that you feel unsure of!
Before using a chain saw you must understand the effects
of kickback and how to avoid them. See instructions under
the heading How to avoid kickback.
Before using a chain saw you must understand the
difference between cutting with the top and bottom edges of
the bar. See instructions under the headings How to avoid
kickback and Machine's safety equipment.
Wear personal protective equipment. See instructions
under the heading Personal protective equipment.
20 –
Canadian
WORKING TECHNIQUES
Basic safety rules
1 Look around you:
• To ensure that people, animals or other things cannot
affect your control of the machine.
• To make sure that none of the above might come within
reach of your saw or be injured by falling trees.
CAUTION! Follow the instructions above, but do not use a
chain saw in a situation where you cannot call for help in case
of an accident.
2 Do not use the machine in bad weather, such as dense
fog, heavy rain, strong wind, intense cold, etc. Working in
bad weather is tiring and often brings added risks, such as
icy ground, unpredictable felling direction, etc.
3 Take great care when removing small branches and avoid
cutting bushes (i.e. cutting many small branches at the
same time). Small branches can be grabbed by the chain
and thrown back at you, causing serious injury.
4 Make sure you can move and stand safely. Check the area
around you for possible obstacles (roots, rocks, branches,
ditches, etc.) in case you have to move suddenly. Take
great care when working on sloping ground.
5 Take great care when cutting a tree that is under tension.
A tree that is under tension may spring back to its normal
position before or after being cut. If you position yourself