Publicité
Calibration
You can run calibration again for accurate weight detection.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Calibration, and then tap OK.
-
Calibration does not start if the door is not closed properly.
-
The drum rotates clockwise and anticlockwise for about 4 minutes.
3. When calibration is complete, the "Calibration complete" message appears on the display and the
washer turns off automatically.
Wi-Fi
You can turn the washer's Wi-Fi on or off.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Wi-Fi, and then tap OK.
3. Tap OK to select On or Off.
-
The washer's Wi-Fi is off as a factory default setting. However, the washer's Wi-Fi turns on
automatically when you turn on the washer for the first time. Then, the final Wi-Fi setting maintains
regardless of the washer power status.
-
Once you turn on the washer's Wi-Fi and connect to a network, the washer remains connected to the
network even when you turn off the power.
-
The Wi-Fi
indicates that the washer is connected to the router through the Wi-Fi connection.
Language
You can change the system language.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Language, and then tap OK.
3. Turn the Navigation dial to select the desired language, and then tap OK.
Self diagnosis
You can use this function to check if there are any abnormal signs on your washer.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Self diagnosis, and then tap OK.
-
Self diagnosis stars immediately and the result appears on the screen once the diagnosis is
complete.
Factory Reset
You can reset the washer.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Factory Reset, and then tap OK.
-
Your washer resets to the factory setting.
Untitled-1 55
English 55
2023-06-27
7:20:12
Publicité
