Publicité
STEP 7 Final check and power on
• Before using your washer, make sure to remove the dehumidifying agent (silica gel) from inside the
upper washer.
• Do not eat or swallow the dehumidifying agent (silica gel).
• The protective cover may form moisture on its surface after the washer has checked for a leak to ensure
normal operation. This is normal, and does not indicate a defective part. Open the cover for a moment
to remove the moisture.
• Plug the power cord into an AC 120 V / 60 Hz / 15 AMP approved electrical outlet protected by a fuse or
circuit breaker. Then, tap
Untitled-1 31
to turn on the washer.
English 31
2023-06-27
7:20:07
Publicité
