Publicité
Noise Emission
The noise emission values have been determined
according to noise test code given in EN 62841-1,
using the basic standards EN ISO 3744 and EN ISO
11201.
Warning: Wear hearing protection!
Handling
• Handle the machine with care,
allowing the machine to do the work.
• Avoid using excessive physical effort
on any of the machines controls.
• Consider your security and stability,
and the orientation of the machine during use.
Work Surface
• Consider the work surface material;
its condition, density, strength,
rigidity and orientation.
LABELS & SYMBOLS
(1.8)
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
Manufacturing Date Code
The manufacturing date code is the first part of
the serial number, found on the motor housing
of the machine. Evolution serial numbers begin
with the abbreviation of the machine followed by
a letter. A = January, B = February and so on. The
following 2 numbers are the year of manufacture.
09 = 2009, 10 = 2010, etc. (Example of batch code:
XXX-A10)
(1.9)
Symbol
Description
V
A
Amperes
Hz
min
-1
~
Alternating Current
n o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
(1.10)
POWER TOOL
WARNING: This product is a Compound Mitre
Saw and has been designed to be used with
special Evolution blades. Only use accessories
designed for use in this machine and/or those
recommended specifically by Evolution Power
Tools Ltd.
WHEN FITTED WITH A CORRECT BLADE THIS
MACHINE CAN BE USED TO CUT:
• Wood, Wood derived products (MDF, Chipboard,
Plywood, Blockboard,Hardboard etc),
Wood with nails,
• 50mm mild steel box section with 4mm
wall at HB 200-220,
• 6mm mild steel plate at HB 200-220.
Note: Wood containing non galvanised nails or
screws, with care, can be safely cut.
Note: Not recommended for cutting galvanised
Volts
materials or wood with embedded galvanised
nails. For cutting stainless steel we recommend
Evolution dedicated stainless steel blades.
Cutting galvanised steel may reduce blade life.
Hertz
PROHIBITED USE OF
(1.11)
Speed
THIS POWER TOOL
WARNING: This product is a Compound Mitre
Saw and must only be used as such. It must not be
modified in any way, or used to power any other
equipment or drive any other accessories other
than those mentioned in this Instruction Manual.
(1.13)
unfamiliar with the machine or these instructions
to operate the machine. Machines are dangerous
in the hands of untrained users. Children should
be supervised to ensure that they do not have
4
www.evolutionpowertools.com
Do Not Touch
Wear Dust Protection
Wear Safety Gloves
Read Instructions
Warning
Protection Class II
Double Insulated
INTENDED USE OF THIS
WARNING: Do not allow persons
Publicité
