Publicité
On/Off switch:
To switch on: Press switch A
Continuous operation: Lock switch A with
locking button B
To switch off: Press switch A briefly
The speed is varied by applying more or less
pressure on switch A. You can preselect the
speed by turning the knurled screw in switch A.
A
B
Gear selector switch
Position for 1st gear
Rotary switch set for hammer mode. Wait for
the drill to stop before changing!
Please note: This switch should be
in 'drill' position when drilling holes in tiles.
Rotary switch set for drilling mode. Wait for the
drill to stop before changing!
GB
Gear selector switch
Position for 2nd gear
9
Publicité
