Publicité
11. Technical data
Mains voltage . . . . . . . . . . 230 –240 V~
Mains frequency . . . . . . . . . . . . . 50 Hz
Power input. . . . . . . . . . . . . . . 1500 W
No-load speed . . . . . . . . . 300–800 min
Impact rate . . . . . . . . . 1500–4000 min
Cable length . . . . . . . . . . . . . . . . 3 m
Weight. . . . . . . . . . . . . . . . . . . 4.8 kg
Max. drilling diameter
Wood . . . . . . . . . . . . . . . . Ø 40 mm
Steel . . . . . . . . . . . . . . . . Ø 13 mm
Concrete . . . . . . . . . . . . . . Ø 32 mm
Noise and vibration
Hammer/drill position
Sound pressure (L
pA
Acoustic power (L
WA
Uncertainty (K). . . . . . . . . . . . . 3 dB(A)
Vibration main handle. . . . . . 12.027 m/s
Uncertainty (K). . . . . . . . . . . . .1.5 m/s
Vibration level
11.1
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 62841; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
• the times when the tool is switched off
or when it is running but not actually
doing the job, may significantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns
12. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
) . . . . . . . 93.3 dB(A)
) . . . . . . 104.3 dB(A)
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
-1
Ask about these at your specialist shop or
-1
local council.
13. EC-Declaration of conformity
We, the Batavia B.V., Weth. Wassebali-
estraat 6d, NL-7951 SM Staphorst, declare
by our own responsibility that the product
SDS Plus Rotary Hammer, Item-No
7064697, Model Nr. BT–PD004, is accord-
ing to the basic requirements, which are
defined in the European Directives Electro-
magnetic Compatibility 2014/30/EU
(EMC), 2006/42/EC (Machinery), RoHS:
2011/65/EU and their amendments. For the
evaluation of conformity, the following har-
2
monized standards were consulted:
2
EN62841-1:2015
EN IEC 62841-2-6:2020/A11:2020
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1;2021
EN 61000-3-3:2013/A1:2019
AfPS GS 2019:01 PAK
Staphorst, 26 June 2023
Jin Min, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
English
9
Publicité
