Mounting The Light With The Slide Nuts M5; Mount The Light With The Screws M6; Other Fastening Elements - Waldmann LUMATRIS MSAL 24 Mode D'emploi

Mounting
No. Dimension
a
Length MSAL 24 S
MSAL 48 S
MSAL 72 S
MSAL 90 S
MSAL 96 S
MSAL 180 S
b
Width MSAL 24/
48/72/96 S
MSAL 90/180 S 170 mm
c
Height
d
Screw channels M6
(depth 9 mm)
e
Tee-slots for slide nuts
M5
(MSAL 90/180 S only)
f Side part length
g Length screw channels g = a - 2*f
and Tee-slots
2.2
246 mm
NOTICE
420 mm
Material damage due to ingress of
596 mm
moisture.
420 mm
Dismounting the side parts will result
770 mm
in defective seals. The ingress of mois-
770 mm
ture will damage the light.
95 mm
X Do not dismount the side parts of
the light.
X Insert suitable slide nuts into the
T-slots from above.
40 mm
62 mm
130 mm
22 mm
Fig. 4: Suitable slide nut M5 (Example).
X Mount the light with suitable slide nuts
M5 to the mounting surface. For the
distances of the tee-slots on the light
MQAL 90/180 S, see Fig. 3.
2.3
X Mount the light with the suitable
screws M6 to the mounting surface.
For the distances of the screw chan-
nels on the light, see Fig. 2 and Fig. 3.
2.4
NOTE: For this light, other fastening
elements are available as accessories.
For more information, please visit our
homepage www.waldmann.com.
Mounting the light with the
slide nuts M5
20 mm
M5
Mount the light with the
screws M6

Other fastening elements

ENG
10,5 mm
4 mm
17