VINCENT KHV-111MK Manuel D'utilisation page 17

1. POWER LED
This LED is lit as long as the KHV-111MK is swit-
ched on and ready for use.
2. POWER: mains switch
Use this switch to turn the headphone amplifier on
and off. When switched off the device is internal-
ly separated from the mains power.
6
6. IN: connectors for the music source
You have the choice of making a connection to
either the stereo audio source itself (CD player,
tuner etc.) or the recording output (REC OUT) of
an amplifier.
FRONT VIEW
1 2 3
REAR VIEW
4 3 5
3. LEFT, RIGHT:
Volume Controls and Balance
These knobs control the left and right channel
Volume of the headphones separately.
4. Tube Display Window
5. PHONES: headphone socket
The jack plug of your headphone must be connec-
ted to this socket. The used headphone must have
an electrical impedance of at least 32 Ω.
7. Power Connector with Fuse holder
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet. The small plastic housing holds the
fuse. Refer to the security precautions.
7
Vincent
17