Publicité
Aligning the appliance
To ensure that the appliance functions correctly, it must
be set level with a spirit level.
For sufficient leveling and air circulating in the lower
Ø
rear section of the appliance, the bottom feet may
need to be adjusted.
To allow the doors to selfclose, tilt back the top
Ø
backwards at about 15 mm or 0.5° by turning the
adjustable feet.
Whenever you want to move the appliance,
Ø
remember to turn the feet back up, so that the
appliance can roll freely.
The rollers, which are not castors, should be only
Ø
used for forward or backward movement. Moving
the refrigerator sideways may damage your floor
and the rollers.
Reinstall the appliance when relocating.
Ø
15 mm
0.5°
adjustable bottom feet
Aligning the doors
When you found the doors are not at the same level,
you can use a spanner to adjust the fridge door.
Only the fridge door can be adjusted.
To raise the fridge door, turn the bolt (1) anticlockwise.
To lower the fridge door, turn the bolt (1) clockwise.
Once in position, lock the nut (2).
en
31
Publicité
