6. TROUBLESHOOTING
Problem
Causes
No light
Power plug is not
connected
No heating
1. Loose cable at the
popcorn bowl
2. Heating tube has
blown
3. Electrical connection
is interrupted
Too high or too
Thermostat failure
low temperature
7. EQUIPMENT
•
Manual
•
Bulb
ATTENTION
Before usage please remove the adhesive tape from the mixing arm, which is placed
inside of the bowl.
10
Possible remedies
1. Fasten the cable
2. Replace bulb
1. Tighten the screws
2. Replace the heating pipe
3. Change the electrical capacity
Change the thermostat
MODE D'EMPLOI
MACHINE À POP-CORN
R C P S - 1 6 E
R C P R - 1 6 E
R C P W- 1 6 E
WWW.CATERINGROYAL.DE