Publicité
16 INSTALLATION
CAUTION
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
• When reassembling the bottom and middle
hinge pins, make sure the pins are completely
assembled and securely tightened to avoid the
door coming loose.
• Tools Needed
- Flat-head screwdriver
- 1/4 in. Hex socket wrench
- 3/8 in. Hex socket wrench
- 1.4 in. Hex key wrench
- Adjustable wrench
Removing the Freezer Door
1
Gently pry off the top hinge cover
flat-head screwdriver and remove it.
2
Using a 10 mm or 3/8 inch socket wrench,
remove the three bolts and lift off the top
b
hinge
. Set the parts aside.
3
Lift the freezer door slightly and remove it.
4
Turn the freezer door upside down on a non-
scratching surface. Loosen the screw to
remove the hinge lever and hinge pin sleeve.
5
Move the middle hinge bracket to the other
side of the door, keeping the same
orientation.
6
Move the hinge pin sleeve
the left side of the bracket
a
with a
7
Reverse the hinge lever
Place it on top of the bracket and tighten both
down with the screw.
8
Set the freezer door to the side.
c
into the hole on
d
.
e
by flipping it over.
Publicité
