Publicité
How to test your Camera
In order to check if your Camera works correctly, it's not necessary to put it into the microscope: it's enough to
connect it into the USB port, run Optika View using the icon on your desktop, select the right driver and check
whether the shown image is not totally black.
Correct driver
OPTIKAM PRO COOL5 CAMERA
Getting started with Optika VIEW, a very easy measuring software
Run Optika View by clicking on its icon on your desktop.
Select the right Driver for capturing the image. Note that after choosing the driver and before capturing the image
you can set the brightness, saturation, gamma ecc..
Then you can capture the image.
The image is now ready for being manipulate.
Page 3
Publicité
