Publicité
Sensor
Function
field
5
-
Timer display
SenseBoil®
6
Bridge
7
Hob²Hood
8
9
-
Control bar
PowerBoost
10
Lock / Child Safety Device
11
4.3 Display indicators
Indicator
+ digit
/
/
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Power limitation
Power limitation defines how much power is
used by the hob in total, within the limits of
the house installation fuses.
The hob is set to its highest possible power
level by default.
To decrease or increase the power level:
1. Enter the menu: press and hold
seconds. Then, press and hold
2. Press
on the front timer until
appears.
3. Press
/
on the front timer to set the
power level.
4. Press
to exit.
Description
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐
ual heat.
for 3
.
Description
To show the time in minutes.
SenseBoil®. To automatically adjust the temperature of
water so that it does not boil over once it reaches the
boiling point.
To activate and deactivate the function.
To activate and deactivate the manual mode of the
function.
To set a heat setting.
To activate the function.
To lock / unlock the control panel.
Power levels
Refer to "Technical data" chapter.
CAUTION!
Make sure that the selected power fits
the house installation fuses.
CAUTION!
If the power level is lower than or equal
to 2000 W you cannot activate
SenseBoil®.
• P73 — 7350 W
• P15 — 1500 W
• P20 — 2000 W
• P25 — 2500 W
• P30 — 3000 W
• P35 — 3500 W
• P40 — 4000 W
• P45 — 4500 W
• P50 — 5000 W
ENGLISH
77
Publicité
