Publicité
DHCP server enabled:
With an enabled DHCP server, you can use the
Client List option to view the devices currently
logged into the WLAN hard drive.
You can set the IP address range within which the
DHCP server allocates IP addresses to clients under
Start address and End address.
Enter the IP address for accessing the access point
on the WLAN hard drive under Gateway.
NOTE!
The IP address of the gateway must be
outside of the IP address range of the DHCP
server.
Pri DNS server
If, in the next menu option "Internet", you have
entered an access point that can be used to connect
to the Internet, then the IP address of this access point
will appear here.
You can also manually enter the IP address for the
primary DNS server here.
Sec DNS server
If there is a second DNS server in the network that
allocates IP addresses, enter the IP address of the
second DNS server here.
Internet
Here you can search for available WLAN networks with
an Internet connection. To do this, click Scan.
204 of 242
Publicité
