Publicité
7. Start of operation
7.1. Charging the battery
The WLAN hard drive has an in-built battery.
You can charge the battery either using the USB
mains adapter included in the delivery or via a USB
connection on your PC or another device with a USB
connection.
Connect the USB cable to the USB 3.0 Micro-B
connection on the WLAN hard drive.
Connect the other end of the cable to the USB
mains adapter and plug it into the mains socket.
Alternatively, connect the USB cable to the USB
connection on your PC or another device that
delivers 5 V output voltage at its USB connection.
Charge status LEDs
•
The battery LED flashes continuously while
charging.
•
Once the battery has been completely charged,
the battery LED will be permanently lit.
188 of 242
Publicité
