Hansgrohe AXOR Starck 10860 1 Serie Instructions De Montage / Mode D'emploi / Garantie page 2

10860xx1
39838xx1
16860xx1
2
English
Technical Information
Recommended water pressure
Max. water pressure
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
This faucet is for use with cold
water only. Do not connect it to
the hot water supply.
• If the countertop is less than ¾" thick, it must
be reinforced to distribute the weight of the
pot filler.
• Allow sufficient space for the escutcheon.
There should be a minimum 1½" between the
center line of the mounting hole and the wall
or backsplash.
• This faucet requires ½" NPSM connection
hose (not included)
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
15 - 75 PSI
145 PSI
2.2 GPM
1⅛"‒1⅜"
2¾"