Party Light & Sound PARTY-12LED Mode D'emploi page 4

1. LED display
2. AUX input via 3.5mm mini stereo jack
3. Mini SD card input
4. USB stick input
5. Input selector: Press this button to switch between the various inputs ( USB, SD, Bluetooth, FM)
6. In USB/SD/Bluetooth mode: press to go back to the previous track. In FM mode: press to go to the
previously stored FM station.
7. Play/pause in USB/SD/Bluetooth mode. In FM mode, press and hold this button to start searching for radio
stations and store them automatically in the memory
8. In USB/SD/Bluetooth mode: press to go to the next track. In FM mode: press to go to the next stored FM
station.
9. EQ
10. Mic priority
11. When the power adaptor is connected, the indicator lamp lights up in red as long as the battery will be
charging. It lights up in green, when the battery is fully charged.
12. Master volume control
13. TREBLE control: Adjustment of high frequencies
14. BASS control: Adjustment of low frequencies
15. Mic volume control
16. Echo control for the microphone
17. AUX input via 6.35mm stereo jack
18. ON/OFF switch of the system
19. AUX output via XLR connectors
20. AUX input via XLR connectors
21. Switches the LED on the woofer on /off
22. AC input connector
23. Battery DC in 12V
Description of the remote control
1. STANDBY: Switches the unit into standby mode.
2. Input Mode Button: Toggle between USB, TF, LINE, BT
3. Mute: Mute the sound
4. PLAY/PAUSE
5. : Select previous channel
6. : Select next channel.
7. EQ: Select EQ mode.
8. VOL-: Reduce the master volume
9. VOL+: Increase the master volume
10. REP: Repeat the playing track.
11. Auto-search for FM channels
12-21. Number keys for direct selection of a track on the USB flash drive or TF
card.
CONNECTION OF A WIRED MICROPHONE (not included)
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound
output.
©Copyright LOTRONIC 2018
PARTY-12LED / PARTY-15LED
4