Warnings And Error Messages - Velleman VLE8 Mode D'emploi

11.

Warnings and Error Messages

In case of an error, this charger will display the cause of error and emit a warning sound.
V. 02 – 04/08/2016
VLE8
The display shows the external temperature (only when the
temperature probe is being used).
The display shows the present input voltage.
If the battery is connected via cable, each cell's voltage is displayed.
Incorrect polarity.
Battery connection is interrupted.
Short-circuit of the output termination.
Voltage error at the input.
Incorrect selection of the battery pack's voltage.
Faulty charger. Please contact your dealer.
The battery pack's voltage is lower than the set voltage value. Check
the number of cells.
The battery pack's voltage is higher than the set voltage value. Check
the number of cells.
15 ©Velleman nv