Publicité
5. OPERATING INSTRUCTIONS
5.1.
DC VOLTAGE MEASUREMENT
The maximum input DC voltage is 300V. Do not measure voltages
exceeding the limits given in this manual. Exceeding these limits could
result in electrical shocks to the user and damage to the instrument.
Fig. 4: Use of the instrument for DC voltage measurement
1. Select the position.
2. Insert the red cable into input terminal V
COM.
3. Position the test leads in the desired spots of the circuit to be measured (see Fig. 4).
The display shows the value of voltage.
"
"
4. Symbol
OL.
instrument.
5. To use the HOLD, MIN/MAX and ZERO functions, please refer to § 4.3.
appearing on the display indicates the overload condition of the
CAUTION
and the black cable into input terminal
EN - 8
HT79
Publicité
