Publicité
SW1-D2
Termination
OFF
Not Terminated
ON
Terminated
You can set coaxitron protocol with D1 and D2 in SW2.
SW2-D1
SW2-D2
OFF
OFF
ON
OFF
ON
OFF
ON
ON
Connections
Connecting to the RS-485
The dome camera can be controlled remotely by an external device or control system,
such as a control keyboard, using RS-485 half-duplex serial communications signals.
Connecting HD-TVI/AHD Output connector
Connect the HD-TVI/AHD output (BNC) connector to the monitor or video input.
Connecting CVBS Output connector
Connect the CVBS output (BNC) connector to the monitor or video input.
Connecting Alarms
A1,A2,A3,A4 (Alarm Input 1,2,3,4)
You can use external devices to signal the dome camera to react on events. Mechanical or
electrical switches can be wired to the A1,A2,A3,A4 (Alarm Input 1,2,3,4) and G (Ground)
connectors.
See Program and Operation for configuring alarm input.
8
HD-TVI OUTPUT
Hikvision-C
Pelco-C
Reserved
Reserved
AHD OUTPUT
Fastrax-C
Reserved
Reserved
Reserved
Publicité
