Topcom Butler 2820
5.5 CALLING A MEMORY NUMBER
•
Press the Memory button
•
Press the Line button
•
Press the Line button
5.6 MUTE FUNCTION
It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by
your correspondent.
•
Press the Mute button
appears on the display.
•
Press the Mute button
5.7 SETTING THE VOLUME
During a conversation you can set the volume by pressing the Volume button
in Hi, Medium and Low.
Note: The hands free receiver volume is also adjustable as above described!
5.8 PAGING
When you press the Paging button
helps you find a lost handset. Press any key to stop the ringing on a handset.
5.9 OUT OF RANGE WARNING
When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal
to warn the user that he has to move closer towards the base unit.
5.10 FLASH BUTTON (R)
When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It
gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have
a telephone exchange.
5.10.1 Setting the Flash time
•
Press and hold the redial button
•
The display will show:
'S' for 100ms
or 'L' for 250ms
•
The flash time setting will disappear after 2 sec. from the display
Caution: The base flash time is different from the handset flash time. To set the base flash time, please
refer to § 9.5.
5.11 SETTING THE RING VOLUME AND MELODY
5.11.1 Handset melody
•
Press and hold the melody button
•
Select the desired melody (1-9) by means of the scroll keys
•
Press
again to confirm the setting
5.11.2 Handset ring volume
•
Press the volume button
•
The handset will ring in the current volume
•
Press 1-5 or use the scroll keys
•
Press '0' to turn the volume OFF
Remark: You can turn the ringer volume of each individual handset ON or OFF by simply press and hold
the
key in standby.
10
, followed by the number of the memory location (0-9).
. The memory number will be dialled automatically.
when you want to terminate the call.
during a conversation. The microphone will be deactivated. The MUTE symbol
again when you want to continue the conversation.
on the base unit, the handset emits a ringing signal for 20 seconds. This signal
for 3 sec.
until the current melody is heard.
in standby
to select the desired volume
. You can set the volume alternatively
or by entering a number (1 - 9).
.
Topcom Butler 2820