Télécharger Imprimer la page

SOUNDMASTER SCD7600TI Mode D'emploi page 23

Publicité

POWER ON / OFF
Press and hold the "POWER" button to torn the unit on.
During on mode, press and hold the "POWER" button to turn the unit off.
SELECTING MODES
During on mode, press the "MENU" button to get into the main menu. Turn the "TUNE/SELECT"
Knob until your desired mode is shown on the display and press the "TUNE/SELECT" Knob to
select the desired mode.
ADJUSTING VOLUME
Rotate the "TUNE/SELECT" knob to the right side to decrease or increase the volume.
Press and hold the Power button to turn the unit on.
SELECTING LANGUAGE
When you switch on the radio for the first time, you have to select the desired language.
CONNECT TO WIRELESS LAN (WI-FI)
Use the "TUNE/SELECT" knob to scroll through the characters, when the correct one is
highlighted, press "TUNE/SELECT" button to input the next character. When it comes to the
last character of the password and it is highlighted, press and hold "TUNE/SELECT" to confirm.
Note: The security code is case sensitive.
1. If this is first time use, the Configure Network wizard
will be displayed. Choose Yes to start configuring
network. Turn the "TUNE/SELECT" knob to highlight
Yes and press "TUNE/SELECT" to confirm.
2. Select Add/Remove AP from the list, use the
"TUNE/SELECT" knob to scroll and press it to confirm,
then choose Add AP (Scan):
3. It will start scanning the available Wi-Fi routers around. Scroll to your network and press
"TUNE/SELECT" to confirm. If your Wi-Fi network has a security code protected, it will
ask you to enter the passphrase/password.
BASIC OPERATIONS
GETTING STARTED
3
SCD7600 / English Instruction Manual
Configure Network?
<Yes> No
Add/Remove AP
.
AP:[
]
Add AP
Remove AP

Publicité

loading

Ce manuel est également adapté pour:

Scd7600