Publicité
Installation Instructions – PORLWTPD1
INSTALLATION
Soandard InsoallaoiNn
1.
Attach Portfolio Accessory to the plaster frame. Using
the supplied #8 screws. (See Figure 2).
2.
The corresponding smart sensor (SU-4E-01) should be
mounted in the ceiling:
a.
To mount the sensor through a ceiling tile, thread
the spring arms around the sensor and insert the
sensor through a 15/16th inch hole in the tile.
3.
Connect sensor cable to control unit on the Accessory.
Connect other end to ceiling mounted sensor.
(See Figure 3).
4.
Flex conduit from Accessory should be inserted into
an available Knockout on the plaster frame j-box. (See
Figure 4).
Figurt 3.
2
2
IL520007EN
EATON
Plug Sensor Cable Here
.820
[20.83]
Ø1.260
[32]
Smart Sensor
Installation instructions
Figurt 2.
1.871
[47 .52]
#8 Screws
Publicité
