Télécharger Imprimer la page

Publicité

Liens rapides

Subject:
No Spark Mow Ball Kit
Kit:
99944400001
Model(s):
WT-1610, WT-1610T, WT-1610HSP, WT-1610SP
REMOVAL
1. Remove front cover. Place 9/16" wrench on top of trimmer shaft. Rotate shaft until wrench engages trimmer
body. Twist the mow ball counterclockwise (viewed from below) to remove.
NOTE: If existing mow ball is difficult to remove, the use of a strap wrench or oil filter style wrench may help in loosening it.
INSTALLATION
*See Option 1 and Option 2 below.
OPERATION
1. Wear safety glasses during operation. Wear proper clothing to protect feet, legs and other exposed body parts.
2. Keep the wheels grounded at all times to prevent undue pressure on the trimmer head which could result in
personal injury.
OPTION 1
The No Spark Mow Ball can be used in conjunction with the existing trimmer plate. Install trimmer line using either
method shown below (Figure 1 and Figure 2). Install front cover.
LINE INSTALLED ON TRIMMER PLATE
99922205588 (Rev 061022)
Figure 1.
No Spark Mow Ball Kit 99944400001
Figure 2.
©2022 ECHO Incorporated. All Rights Reserved.
- 1 -
INSTRUCTION SHEET

Publicité

loading

Sommaire des Matières pour Echo 99944400001

  • Page 1 INSTRUCTION SHEET No Spark Mow Ball Kit 99944400001 Subject: No Spark Mow Ball Kit Kit: 99944400001 Model(s): WT-1610, WT-1610T, WT-1610HSP, WT-1610SP REMOVAL 1. Remove front cover. Place 9/16” wrench on top of trimmer shaft. Rotate shaft until wrench engages trimmer body.
  • Page 2 INSTRUCTION SHEET No Spark Mow Ball Kit 99944400001 OPTION 2 The No Spark Mow Ball can also be used by itself. Install trimmer line using either method shown below (Figure 1 and Figure 2). For best results use .155 diameter line. Install front cover.
  • Page 3 Instale el hilo de corte utilizando cualquiera de los métodos que se muestran a continuación (Figura 1 y Figura 2). Instale la cubierta frontal. HILO DE CORTE INSTALADO EN LA PLACA CORTADORA Figura 1. Figura 2. ©2022 ECHO Incorporated. All Rights Reserved. 99922205588 (Rev 061022) - 3 -...
  • Page 4 Instale la cubierta frontal. HILO DE CORTE INSTALADO DIRECTAMENTE EN LA BOLA DE SEGAR Figura 1. Figura 2. ECHO Incorporated 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com 1-800-432-ECHO (3246) 78836-00 ©2022 ECHO Incorporated. All Rights Reserved. - 4 - 99922205588 (Rev 061022)
  • Page 5 (Figure 1 et Figure 2) Installer le capot avant. FIL INSTALLÉ SUR LA PLAQUE DE COUPE Figure 1. Figure 2. ©2022 ECHO Incorporated. All Rights Reserved. - 5 - 99922205588 (Rev 061022)
  • Page 6 FIL INSTALLÉ DIRECTEMENT SUR LA BOULE DE TONTE Figure 1. Figure 2. ECHO Incorporated 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com 1-800-432-ECHO (3246) 78836-00 ©2022 ECHO Incorporated. All Rights Reserved. 99922205588 (Rev 061022) - 6 -...