Publicité
3.0 SAFETY INSTRUCTIONS
This product has been constructed and tested in accordance with
the appropriate safety regulations and has left the factory in a safe
and perfect condition.
The operating instructions contain information and references
required for safe operation and use of the product. Before using
the product, read the operating instructions carefully and follow
them in all respects. Otherwise, protection may be impaired.
To avoid electric shock, observe the precautions when working
with voltages exceeding 120 V (60 V) DC or 50 V (25 V) eff AC. In
accordance with DIN VDE these values represent the threshold
contact voltages (values in brackets refer to limited ranges, e.g. in
agricultural areas).
Before using the product, ensure that the device is in perfect
working condition. Look out e.g. for broken housing parts or similar.
The product may be used only within the specified measurement
ranges.
The product may be used only in the measuring circuit category it
has been designed for.
It is not permitted to use the product during rain or wet condition.
Before and after use, always check that the product is in perfect
condition (e.g. on a known voltage source).
If the safety of the user cannot be guaranteed, the product must
not be used anymore.
Safety is no longer guaranteed e.g. in the following cases:
•
obvious damage,
•
broken housing, cracks in housing,
•
stored for too long in unfavorable conditions,
•
damaged during transport.
Product must be operated by trained users only.
Never use the product in explosive environment.
The product may be opened by an authorized service technician
only.
5
ENGLISH
Publicité
