Publicité
ENGLISH
6.3 Resistance Measurement
Prior to any resistance measurement it has to be ensured that
the resistor to be tested is not live. Failure to comply with
this prescription can lead to dangerous corporal user injuries
or cause instrument damage. Additionally, foreign voltages falsify the
measurement result.
•
Select
selection switch.
•
Multimeter will automatically enter in
•
Connect the black test lead to the COM socket and the red test
lead to the
•
Connect the test leads to UUT.
•
Read the measurement result displayed on the display.
6.4 Continuity Test
Prior to any continuity test, it must be ensured that the
resistance to be measured is not live. Failure to comply with
this prescription can lead to dangerous corporal user injuries
or cause instrument damage. Additionally, foreign voltages falsify the
measurement result.
•
Select
selection switch.
•
Press "Select" button once to enter continuity ( ) mode
•
Connect the black test lead to the COM socket and the red test
lead to the
•
Connect test leads to UUT.
•
Read the measurement result displayed on the display.
Acoustic indication by signal sound if resistance < 30
measurement mode via measurement function
mV
measurement mode via measurement function
mV
mode
socket.
socket.
20
Publicité
