Publicité
ENGLISH
5.1 Buttons - Functions of the buttons
Relative
Use RANGE/RELATIVE button to activate or deactivate the Relative
function. The Multimeter MUST be in Auto Range mode before applying
Relative function, unless it is in mV, Continuity, Diode or Temperature
measurement, which operate in Manual Range mode only.
•
When in Auto Range, long press on RANGE/RELATIVE button
activates Relative function (and at the same time Manual Range
mode).
•
When in Relative mode, long press on RANGE/RELATIVE button
will exit Relative function and set Multimeter back to Auto Range
mode.
Hold
Use HOLD button to activate/deactivate Hold function. This freezes the
last measured value on the display:
•
Short press on HOLD/MIN/MAX/AVG button activates Hold
function.
Next short press on HOLD/MIN/MAX/AVG button deactivates
•
Hold function.
14
Publicité
