Publicité
ENGLISH
6.1 Overview Measurement Modes
OFF
Multimeter is turned off.
V SCAN – Automatic AC/DC Detection and Measurement.
In V SCAN mode Multimeter automatically detects
whether AC or DC voltage is present across the probes and
performs the correct type of voltage measurement. Proper
AC/DC recognition is valid for the voltages greater than
0.3V. In this mode SCAN symbol will appear on the display.
V AC/DC – Manual selection of the type of voltage
measurement. Use SELECT button to toggle between AC
and DC measurement modes. In this mode SCAN symbol
is not shown.
mV measuring mode. Use SELECT button to toggle
between AC and DC measurement modes.
Resistance, Continuity, Diode and Capacitance
measurements. Use the SELECT button to cycle through
these measurement modes.
Frequency measurement
Temperature measurement in °C or °F scale. Use SELECT
button to toggle between °C and °F measurement scales.
Current measurement in 10A range. Use SELECT button
to toggle between AC and DC measurement modes.
10 A terminal
Current measurement in mA + µA range. Use SELECT
button to toggle between AC and DC measurement modes.
Non-Contact Voltage mode indicates the strength of an
AC Electric Field.
use
mV
terminal
18
use
Publicité
