Publicité
Using the Saw
General care tips:
Clean reservoir out thoroughly after each use.
Empty cutter and store the saw on edge opposite handle
Always keep water level to recommended level. Do not overfill or ever
allow to run dry.
The powerful geared motor is protected by a thermal cut-out switch. In
the unusual event of this operating, disconnect the power, then allow
cutter to cool down. Before reconnecting, check that the wheel is free
from obstructions. If the problem persists consult a qualified electrician
or telephone the Princess Auto location near you
Keep the wet saw clean and free from oil and grease.
Store in dry conditions.
The wet saw requires no maintenance by the user and no regular
servicing is required. In the unlikely event of a defect developing, do not
attempt to dismantle or repair the unit yourself. the Diamond Wheel
cutting saw contains no customer serviceable parts.
Publicité
