Publicité
List of pictograms used
Direct current / voltage
Alternating current / voltage
Safety class II
Safety class III
Cordless LED Work Light PASL
4000 B2
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the product as
described and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.
Intended use
Q
This product is intended for normal use.
This product is only suitable for private
use in dry indoor locations, e.g. in
storeroom or corridor. The product and the re-
chargeable battery withstand extreme physical
conditions of vibration (1.0 m² / s³, 200–2000 Hz).
The product is not intended for commercial use or
for use in other applications. For indoor use only!
Not suitable for ordinary lighting
in household room illumination.
14 GB/IE
Polarity of output terminal
USB-connection
(SMPS) Switch mode power
supply unit
Short-circuit proof safety transformer
Description of parts
Q
and features
Spotlight
1
Side light
2
ON / OFF switch
3
Charging indicators (LED torch)
4
Hook
5
USB input socket (type C) for LED torch
6
Magnet
7
Magnetic base
8
Power indicator (charging station)
9
USB input socket (type C) for charging station
10
USB cable
11
Mains adaptor
12
Mounting hole (charging station)
13
Screw
14
Dowel
15
Technical data
Q
Input:
LEDs:
Rechargeable battery: 1 x Lithium-Ion 3.7 V
Charging time:
Light on time:
5 V
max. 1 A
1 x 0.8 W for spotlight,
1 x 2 W for white light,
1 x 0.15 W for UV light
(not replaceable)
4000 mAh (not replaceable)
approx. 6–8 hours (with
included mains adaptor)
approx. 3.5 hours for the
inspection light and 8 hours
,
Publicité
