Publicité
1. Turn the product over and hold it tight. Press the ON/OFF button
to position "OFF" to switch off the product. Loosen the fastening
screws
by using a small cross head screwdriver and then lever out
2
the battery compartment lid
2. Take out the silicone cover
battery
to a new one, ensure that you do not damage the wiring.
5
Take care to the correct polarity, when inserting the new recharge-
able battery. The polarity is indicated in the battery compartment
. The new rechargeable battery has to have the same technical
6
data like the old one.
3. Put back the silicone cover
otherwise the IP protection is not guaranteed. Now again fasten
the battery compartment lid
by using a small cross head screwdriver. Press the ON/OFF but-
ton
to position "ON" to enable the product switching on dur-
1
ing darkness.
Charging the rechargeable battery
Note that the product must be switched on when the rechargeable
battery is charging.
with the help of a slot screwdriver.
3
. Exchange the old rechargeable
4
. Pay attention to the silicone cover
4
, fasten the fastening screws
3
1
,
4
2
GB/IE/NI
15
Publicité
