Bosch ARM 34 Notice Originale page 12

OBJ_BUCH-1996-001.book Page 11 Wednesday, October 2, 2013 8:30 AM
Mounting and Operation
Action
Delivery Scope
Wheel Assembly
Handle Assembly
Snap together the Grassbox
Grassbox fitting/removing
Troubleshooting
TOP
Problem
Motor refuses to start
Machine functions
intermittently
Garden product leaves ragged
finish
and/or
Motor labours
Blade not rotating while garden
product switched on
Excessive vibrations/noise
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Bosch Power Tools
Action
Adjusting the Cutting Height
Figure
Starting
1
Stopping
2
Working Advice
3
Blade Maintenance
Selecting Accessories
4
Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Grass too long
Motor protector has activated
Extension cable damaged
Internal wiring of garden product damaged
Motor protector has activated
Height of cut too low
Cutting blade blunt
Possible clogging
Blade fitted upside down
Cutting blade obstructed
Blade nut/bolt loose
Blade nut/bolt loose
Cutting blade damaged
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
English | 11
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Increase height of cut and tilt garden product
to reduce starting load
Allow motor to cool and increase height of cut
Inspect cable, replace if damaged
Contact Service Agent
Allow motor to cool and increase height of cut
Increase height of cut
Replace the blade
Check underneath the garden product and
clear out as necessary (always wear gardening
gloves)
Refit blade correctly
Switch off garden product
Clear obstruction (always wear gardening
gloves)
Tighten blade nut/bolt (17 Nm)
Tighten blade nut/bolt (17 Nm)
Replace the blade
F 016 L81 048 | (2.10.13)
Figure
5
6
6
7
8
9