Publicité
Les langues disponibles
Les langues disponibles
AXIS Q1961-XTE Explosion-Protected Thermal Camera
(防 防 防 爆 爆 爆 サ サ サ ー ー ー マ マ マ ル ル ル カ カ カ メ メ メ ラ ラ ラ )
It is strictly prohibited to carry out any attempt of repairs other than by approved and
trained personnel.
•
You may only open the device to access the SD card and to connect the cables. Do not
remove the device's front glass for any reason.
•
Check all mounting fasteners for tightness at a regular interval.
•
To maintain a smooth operation, clean the device regularly. Use water, mild detergent
and a damp cloth.
•
Be careful not to scratch, damage or leave fingerprints on the front glass. This could
decrease image quality. If possible, keep the protective plastic on the front glass until the
installation is completed.
•
Never use harsh detergents, gasoline, benzene, acetone, or similar chemicals.
Battery
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
Further information
•
The user manual is available at axis.com
•
To check if there is updated firmware available for your device, see axis.com/support
•
For useful online trainings and webinars, see axis.com/academy
Optional accessories
For a complete list of available accessories for this product, go to the product's page on
axis.com and select Software & Accessories.
10
Publicité
