Table des Matières
Publicité
Once installed, the App will ask you to accept the license contract.
Please read this carefully and, if you agree to the terms, click on "I accept
If you do not accept the terms, click on "I do not accept".
In this case you will not be able to access the application.
Step 4
Click on the icon in the bar at the top of the screen to access the menu for connection to your WiFi
Step 5
The name of the WiFi network to which your smartphone/tablet is connected will normally automatically appear in the "WiFi Network Name" field.
If it does not, please fill in the field making sure the correct case is used.
Please then fill in the "Password" field with your WiFi network password, make sure you use the right case.
You can view the characters of the password you have entered by checking the "Password visible" box.
Click on "Add new bulb".
Note: if you have problems clicking on the "Add new bulb" bar due to the format of your device's screen, click on the "Refresh" icon located to the right of the
"WiFi Network Name" field.
Step 6
Your bulb should now appear. You can click on the provisional name for the bulb.
In case your application couldn't find neither WIFI network nor bulb on the WIFI network, please switch the bulb off (power switch off). Exit the application,
wait for 1 minute then switch on your bulb with your power switch and start again the WIFI network/bulb search. If this still doesn't work, please switch off
both your bulb and your internet box, switch on your internet box/router, wait for the internet connection, switch on your bulb and start again the WIFI
network/bulb search. If this still doesn't work, it is possible that 1) your bulb may be too far from your box 2) that the frequency of the box may be not
compatible with the bulb. If possible, try to move closer the bulb to the box and/or modify the frequency of the box (see chapter 3 " Safety instructions")
Step 7
Once you have clicked on the name you can change it if you wish.
network.
Publicité
Table des Matières
