Safety Instructions - Bell & Wyson BW 1.1 Wifi Manuel D'utilisation

Table des Matières

Publicité

3 ) SAFETY INSTRUCTIONS

CAUTION!
Do not position the BW 1.1 in damp places, e.g. close to a water outlet, or a heat source such
as a radiator, cooking top or oven...
Never allow the BW 1.1 to get wet and never spray liquids towards it
Only mount the BW 1.1 on the ceiling and/or wall (see diagram in section 2),
Do not use outdoors
Do not use the BW 1.1 for emergency exits
Do not cover the openings. Do not insert objects in the product's openings or slots
Do not use with electrical sockets or connectors which are not designed for this type of bulb
Do not install in closed fixtures which restrict the flow of air and/or prevent the correct
dissipation of heat
Do not open the BW 1.1 except to install the battery, doing so will void the guarantee and
may damage the product
Do not install in places infested with insects or in dusty places (dust particles may trigger
false alarms)
Do not install in zones in which there are significant temperature variations
Do not install in garages; vehicles release combustion products when they are started
Avoid direct eye contact with the light beam and avoid looking directly at the lamp for long
periods. This is a Group 1 product pursuant to the IEC/EN62471 standard
The battery may explode or cause injury if disassembled, recharged or exposed to water,
flames or elevated temperatures
Keep the product out of the reach of children. If swallowed seek medical attention urgently.
Do not install this product in kitchens, or at least 900 mm from the following:
o the kitchen entrance door
o a bathroom fitted with a bath or shower
o mechanical ventilation ducts used for heating or cooling

Publicité

Table des Matières
loading

Produits Connexes pour Bell & Wyson BW 1.1 Wifi

Table des Matières