Zoofari 345707 2004 Notice De Montage page 5

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery/Parts list
(Fig. A)
1 x Bottom plate (1)
1 x Large lying area (2)
1 x Small lying area (3)
1 x Cat's lair (4)
1 x Column with screw thread, 37cm (5)
3 x Column with screw thread, 35cm (6)
5 x Screw M8 x 40mm (7)
1 x Allen key (8)
1 x Assembly instructions
Technical Data
Dimensions: approx. 60 x 80 x 39cm
(W x H x D)
Max. load capacity:
6kg
Date of manufacture (month/year):
12/2020
Correct use
The product is not intended for industrial use.
It serves as an indoor scratching tree for cats.
Safety notes
Important: Read these assembly instruc-
tions attentively and keep them careful-
ly without fail!
Danger to life!
• Never leave children unattended with the
packaging material. There is a danger of
suffocation.
• The item is not intended for climbing or for use
as a toy. Ensure that nobody stands on it or
pulls themselves up on it, especially children.
The item can fall over.
Risk of injury!
• Before using the product, ensure proper stabil-
ity.
• Place the product on a plain, even surface
and not in the vicinity of stairs.
• Do not place any dangerous objects, such as
candles, on or near the product.
• Regularly examine the product for wear.
Regularly check all the threaded joints for
tightness. The item may only be used in impec-
cable condition.
• T he item may only be used for the purpose for
which it is intended.
• The maximum load capacity may not be
exceeded.
Assembly
1. Remove the packaging and place all the parts
of the product on the floor.
2. Screw the columns (5), (6), as shown in
Fig. B, to the cat's lair (4) and the large lying
area (2).
3. Completely assemble the product as shown in
Fig. C.
Important! Ensure firm fitting of the screws (7).
Note: To reduce the danger of tipping
over, the product can be stood with its
rear side against a wall.
Storage, Cleaning
When not in use, always store the product clean
and dry at room temperature.
Only vacuum the product.
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE 7