Dovre TAI 35W Installation Et Mode D'emploi page 40

Apply the heat-resistant paint in thin layers and leave
to dry well before using the appliance.
Some enamel colours are temperature-sensitive. It
can happen that the colour changes during use.
The original colour will return after the appliance
has cooled down.
If enamelled surfaces become very hot, hairline
cracks can occur. This is a normal phenomenon
and has no impact on the functioning of the stove.
Ensure that the stove is not overburdened. If it
does become overburdened then the surface
gets very hot possibly resulting in lasting dam-
age to the enamel.
Checking the seal
Check whether the door sealing rope is still in good
condition and works well. The sealing rope is sub-
ject to wear and will need to be replaced over time.
Check the appliance for air leaks. Close any
chinks with stove sealant.
Allow the sealant to harden fully before lighting
the appliance, as any moisture in the sealant
will form bubbles, resulting in a new air leak.
TAI 35W spare parts
1
2
3
4
5
6
7
16
Pos. Part number Description
01 03.76190.000 baffle plate
02 03.77555.000 back inner plate left
03 03.77554.100 side inner plate left
04 03.05404.002 ash removal port
05 03.77455.002 fire basket
06 03.66556.002 fire compartment
07 03.05216.000 ash pan
2
3
09-20020-369
and right
and right
base
Subject to change because of technical improvements
Quantity
1
2
2
1
1
1
1