Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Front View
Width dimensions were measured from hinge to hinge.
When leveling legs are fully extended to 1¹⁄₄" (3.2 cm) below
rollers, add 1¹⁄₄" (3.2 cm) to the height dimensions.
A
(see chart following)
Model
Width A (hinge edge to hinge edge)
42
41³⁄₄" (106 cm)
48
47³⁄₄" (121.3 cm)
Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
The dolly wheel height must be added to the tipping radius
when a dolly is used.
Side Tipping Radius
The side tipping radius varies depending upon the width of the
model. Use the chart provided to determine the side tipping
radius.
NOTE: Tip on side only.
*83³⁄₈"
(211.8 cm)
The location must permit both doors to open to a minimum of 90°.
Allow 4¹⁄₂" (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using wood
overlay panels, custom handles, or extended handles.
Model
42
48
Tipping Radius
A
Model
Tipping Radius A
42
91³⁄₈" (232.1 cm)
48
94³⁄₈" (239.7 cm)
Door Swing Dimensions
A
B
90˚
110˚
A
B
40³⁄₄"
39³⁄₄"
(103.5 cm)
(101.0 cm)
43¹⁄₄"
42"
(109.9 cm)
(106.7 cm)
C D
90˚
110˚
C
D
45³⁄₈"
46³⁄₄"
(115.3 cm)
(118.8 cm)
48⁵⁄₈"
50¹⁄₄"
(123.5 cm)
(127.6 cm)
9
Publicité
Table des Matières
