JAC DURO 450 Notice D'utilisation Originale page 13

D. Remove the front table.
E. On the upper part of the front frame, remove screws A, which secure the frame to the
polypropylene strips (never remove the strips from the frame, as you risk altering factory
settings).
F. Lay the frame down forwards. Replace the blades on the rear frame (place something to
protect yourself on the front frame blades). Remove the blade-tightening Allen screws B.
Replace the blades, checking that they locate correctly in the swing arm pins. Retighten the
blades by tightening screws B, with the blades remaining on the frame as a reference.
Misch machines (BEG – BEG ETL – BET – BEM)
(fig.6)
A. Pull the lever towards you in order to position the loaf pusher towards the rear of the machine
and engage the lug that locks the loaf holder in the rear position.
B. Remove the two screws for the rear table and slide it in order to clear the front table.
C. Release the bagger by removing the left and right-hand thumbscrews and remove the two
cover screws.
D. Open the cover and remove the two screws for the front table.
E. Remove the front table.
F. On the upper part of the front frame, remove screws A, which secure the frame to the
polypropylene strips (never remove the strips from the frame, as you risk altering factory
settings).
G. Lay the frame down forwards. Replace the blades on the rear frame (place something to
protect yourself on the front frame blades). Remove the locknuts on screws B. Remove the
blade-tightening Allen screws B. Replace the blades, checking that they locate correctly in the
swing arm pins. Retighten the blades by tightening screws B, with the blades remaining on the
frame as a reference. Then tighten the nuts.
In order not to distort the frame and avoid the risk of dangerous breakages, only replace 1 to 3
blades at a time alternating from left to right.
Resume the procedure from point 6 for the front frame and refit the front frame and the cover
components.
Connect your machine to the mains supply; it is now ready.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
13
English