Microlife OXY 200 Mode D'emploi page 8

10. Guarantee
This device is covered by a 2 year guarantee from the date
of purchase. During this guarantee period, at our discre-
tion, Microlife will repair or replace the defective product
free of charge.
Opening or altering the device invalidates the guarantee.
The following items are excluded from the guarantee:
 Transport costs and risks of transport.
 Damage caused by incorrect application or non-
compliance with the instructions for use.
 Damage caused by leaking batteries.
 Damage caused by accident or misuse.
 Packaging/storage material and instructions for use.
 Regular checks and maintenance (calibration).
 Accessories and wearing parts: Battery.
Should guarantee service be required, please contact the
dealer from where the product was purchased, or your local
Microlife service. You may contact your local Microlife
service through our website: www.microlife.com/support
Compensation is limited to the value of the product. The
guarantee will be granted if the complete product is
returned with the original invoice. Repair or replacement
within guarantee does not prolong or renew the guarantee
period. The legal claims and rights of consumers are not
limited by this guarantee.
6
11. Technical specifications
Model:
Pulse Oximeter JPD-510E
Type:
OXY 200
Display: LED display
Software version: V 2.12
SpO :
2
Measurement range: 35 ~ 100%
Measurement ≤3% (70% – 100%)
precision:
Resolution:
1 %
Pulse rate:
Measurement range: 25 ~ 250 bpm
Accuracy: ±2 bpm
Resolution:
1 bpm
Operating 5 – 40 °C / 41 – 104 °F
conditions: 15 – 80 % relative maximum
humidity
Storage conditions:
-10 – +50°C / 14 – 122 °F
10 – 93 % relative maximum
humidity
Automatic Automatically shut down in
switch-off:
10 seconds, when no or low
signal is detected.
Battery: 2 x 1.5 V alkaline batteries;
size AAA
Battery lifetime:
approx. 30 hours (using new
batteries)
Weight: 50 g (including batteries)
Dimensions: 62 x 37 x 32 mm
IP Class:
IP22
Reference to
EN ISO10993-1/-5/-10; IEC
standards: 60601-1; EN 60601-1-2; ISO
80601-2-61;
EN 62304; EN 60601-1-6
Expected service life:
5 years (when used 15 times/
day; 20 minutes for each
measurement)