geo-FENNEL FKL 44 Mode D'emploi page 22

EN
TRACKING FUNCTION
with the optional receiver FR-FKL TRACKING (art.-no. Nr. 454050)
When the FKL 44 has completed the self-levelling procedure power on the FR-FKL TRACKING and to
start the automatic tracking function press button
Now the laser automatically aligns to the horizontal center of the receiver. The activation
of the tracking function is shown in the display of the remote control. The blue tracking
LED of the receiver is blinking.
When the center of the target has been reached the LED changes to permanent
green light. The tracking process has now been completed.
The FKL 44 and the receiver must work on the same channel which will be
displayed by permanent light of the channel selection LED. In case the laser and
the receiver do not work on the same channel the channel selection LED is blinking.
Then, select the same channel with the channel selection button of the receiver and
button 2 of the FKL 44 (channel 1,2 or 3) .
22
Automatic
tracking function
Channel
selection
Channel LED
1, 2, 3
Tracking-
LED
.
ON/OFF
ON/OFF
LED