Publicité
Les langues disponibles
Les langues disponibles
MICROWAVE POWER / TEMPERATURE
When the
icon flashes on the display, turn the
knob to adjust the power setting and then press
confirm and continue to alter the settings that follow
(if possible).
Please note: Once the function has been activated, the
power can be changed by pressing
settings menu, then turning the knob to change the setting.
GRILL POWER
There are three defined power levels for grilling: 1
(low), 2 (mid), 3 (high). The default value is displayed
between two flashing "- -" symbols.
Turn the knob to set the desired grill level, then press
to confirm.
DURATION
When the
icon flashes on the display, use the knob
to set the cooking time you require and then press
to confirm.
You do not have to set the cooking time if you want
to manage cooking manually: Press
start the function.
Note: During cooking, you can adjust the cooking time by
turning the knob; each time you press
increases by 30 seconds.
PREHEAT
Select the function, then use the knob to set the
target temperature you require and press
confirm and start the function.
When the oven reaches the target temperature the
buzzer plays a sound and the display shows "Add
Food".
Please note: it is advisable not to put the food into the oven
until it reaches the target temperature.
to
to access the
°C / W
to confirm and
, the cooking time
to
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
Every time the
button is pressed again, the cooking
time will be increased by a further 30 seconds (for
Functions using Microwaves) or 5 minutes (for
Functions not using Microwaves).
Please note: You can press
that is currently active.
. JET START
When the oven is turned off, it is possible to start
a microwave cycle by pressing the Start button.
Each additional press of the
the time by an additional 30 seconds. For example,
it is possible to run a microwave function lasting
90 seconds, by pressing the
without even needing to turn on the oven.
. SAFETY LOCK
This function is automatically activated to prevent the
oven from being activated on accidentally.
Open and close the door, then press
function.
4. PAUSE
To pause an active function, for example to stir or turn
the food, simply open the door.
To start it up again, close the door and press
AUTOMATIC PAUSE
(STIR OR TURN THE FOOD)
Certain functions will pause to allow you to turn or stir
the food.
Once the oven has paused cooking, open the door
and carry out the action you are prompted to perform
before closing the door again and pressing
continue with cooking.
at any time to stop the function
button will increase
button three times,
to start the
.
to
Publicité
