Publicité
Les langues disponibles
Les langues disponibles
At the same time as you are doing this,
place the nut
under the load plate
11
with the help of a ring spanner (18 mm).
Fix the hex bolt
and nut
10
together with a socket wrench plus socket
(18 mm) and a ring spanner (18 mm) (see
Fig. G).
Lower the vehicle jack back down to its orig-
inal height by turning the release valve
anticlockwise. Ensure that the release valve
does not become detached and allows the
hydraulic oil to escape (see the section on
"Lowering the vehicle").
If you no longer need to use the adapter
remove it by releasing the hex bolt
the nut
with a socket wrench plus socket
11
(18 mm) and a ring spanner (18 mm) (see
Fig. E).
Then fix the hex bolt
10
place together inside the load plate
safe keeping.
Cleaning and care
Never use harsh or corrosive cleaning agents.
Liberally grease all external moving parts.
Clean the hydraulic trolley jack using a
slightly oily cloth.
Fully lower the lifting arm
handle sleeve
to be able to store the
6
trolley jack in the smallest possible space.
Maintenance and service
Note: Refilling or topping up with hydraulic
oil may only be carried out by specialist
personnel! Always use hydraulic oil that fulfils
the specification for SAE 10. Please note
that filling with too much oil may adversely
affect the functioning of the vehicle jack. Fill
with a maximum of 115 ml oil when all the
oil has been used. Fill the hydraulic oil res-
ervoir up to the bottom edge of the filling
opening (see Fig. H).
3
in place
11
5
5
,
9
from
10
and the nut
in
11
for
3
and lifting
2
Note: The Lifetime of three years expires,
if the car jack get not checked by qualified
specialist.
Note: The plug for refill oil can be removed
by a slotted screwdriver.
Note: The hydraulic fluid must be checked
at complete lowered load lever.
Defective hydraulic vehicle jacks must be
repaired by a specialist workshop only.
Never attempt to repair the hydraulic vehicle
jack yourself.
Never take the hydraulic vehicle jack to
pieces. Taking the vehicle jack to pieces
yourself may result in it not working properly.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
To help protect the environment, please dispose
of the product properly when it has reached the
end of its useful life and not in the household
waste. Information on collection points and their
opening hours can be obtained from your local
authority.
Dispose of the hydraulic oil in an environmentally
compatible manner. Ask your local repair garage
to see to its disposal or find your nearest waste
materials collection centre.
Warranty
The product has been manufactured to strict
quality guidelines and meticulously examined
before delivery. In the event of product defects
you have legal rights against the retailer of this
product. Your legal rights are not limited in any
way by our warranty detailed below.
The warranty for this product is 3 years from the
date of purchase. Should this product show any
fault in materials or manufacture within 3 years
GB/IE/NI
9
Publicité
