Moulinex Turbo Cuisine Maxi CE778810 Mode D'emploi page 117

• Optional: Press and set the desired time by turning the
control panel knob to the right (to increase time) or to the left
(to decrease time).
• Optional: Press and set the desired temperature by turning
the control panel knob to the right (to increase temperature) or
to the left (to decrease temperature).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen
displays alternatively
light indicator turns on.
• When the pre-heating phase is completed, the appliance
switches automatically to cooking phase. The screen
displays the count down and the cooking in progress
light indicator turns on.
• Place the ingredients in the cooking pot and keep the lid open
to stir-fry.
• At the end of the count down, the appliance beeps and the
screen displays .
• After a few seconds, the appliance will automatically switch to
standby mode. The screen displays
• Press for 3 seconds to stop the program at any time.
Steam program
• Place 150ml of water ( 3 ⁄ 4 cup) in the cooking pot, put the
steam accessory in the cooking pot and add your ingredients.
Completely close and lock the lid.
• Turn the control panel knob to the right to reach Steam pro-
gram . The screen displays the default cooking time.
• Optional: Press and set the desired time by turning the
226
& and the pre-heating
.
control panel knob to the right (to increase time) or to the left
(to decrease time).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen
displays alternatively
light indicator turns on.
• When the pre-heating phase is completed, the appliance
switches automatically to cooking phase. The screen
displays the count down and the cooking in progress
light indicator turns on.
• During cooking process,
appliance and pushes the float valve up. The under pressure
light indicator turns on to notify that the lid cannot be
opened without releasing the pressure first.
• At the end of the count down, the appliance beeps and the
screen displays .
• After a few seconds, the appliance will automatically switch
to keep warm phase. The screen displays
warm light indicator turns on.
• Press for 3 seconds to stop the program at any time.
Bake program
• Place the preparation in the cooking pot and close but don't
lock the lid.
• Turn the control panel knob to the right to reach Bake program
. The screen displays the default cooking time.
• Optional: Press and set the desired time by turning the
control panel knob to the right (to increase time) or to the left
(to decrease time).
& and the pre-heating
pressure builds up in
and the keeping
the
EN
227