Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GETTING TO KNOW YOUR CLEANER
A.
Cord Reel Pedal
B.
Exhaust Filter Cover
C.
Exhaust Filter
D.
Parking Slot
E.
On/Off Pedal
F.
Dust Container Assembly
G.
Main Body
H.
Hose
I.
Suction Regulator
J.
Hose Handle
K.
Telescopic Tube
L.
Telescopic Tube Adjuster
M.
Floor Type Selector Pedal
N.
Carpet And Floor Nozzle**
O.
Dust Container
P.
Vortex Finder
Q.
Pre-motor filter Assembly
R.
Dust Container Lid
S.
Dust Container Release Button
T.
2 in 1 Accessory
U.
Pet Hair Remover Mini Turbo Nozzle*
V.
Allergen Remover Mini Turbo Nozzle*
W.
Parquet Nozzle*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
Connect the hose to the cleaner main body, ensuring it clips and locks into position.
1.
To release: simply press the button on the hose end and pull. [1]
Connect the hose handle to the upper end of the extension tube [2], or accessories,if
2.
required.
3.
Connect the lower end of the telescopic tube to the Carpet & Floor nozzle** [3] or
accessories if required.
USING YOUR CLEANER
Extract the power cord and plug it into the power supply. Do not pull the cord beyond
1.
the red marker.[4]
2.
Adjust the telescopic tube to the desired height by moving the telescopic release button
up and raise or lower the handle to the most comfortable cleaning position. [5]
Carpet & Floor Nozzle**. Press the floor type selector on the nozzle [6] to select the
3.
ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for deeper cleaning.
Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [7]
4.
Adjust the suction regulator on the handle to the desired level.[8]
5.
Switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord
6.
reel pedal to wind the power cord back into the cleaner. [9]
PARKING AND STORAGE SECTION
The tube and the nozzle can be parked on the back of the cleaner for storage or temporary
storage while in use. [10]
ACCESSORIES
All accessories can be fitted to the end of the hose handle or the end of the tube.
2 in 1 Accessory– Combines several functions into one tool: [T]
Crevice Tool – For corners and hard to reach areas.
Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet
hair removal. [U]
Allergen Remover Mini Turbo Nozzle* –
deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for
allergen removal. [V]
Parquet Nozzle * - For Parquet floors and other delicate floors. [W]
IMPORTANT: Do not use the Mini Turbo nozzles on rugs with long fringes, animal hides and
carpet pile deeper than 15mm. Do not keep the nozzle station ary while the brush is rotating.
2
*Certain Models Only
Use the mini turbo nozzle on stairs or for
** Certain models only, nozzles may vary according to model
GB
Publicité
Table des Matières
